Sony XDCAM PDW-1500 Operation Manual page 111

Item number Item name
301 VAR SPEED RANGE FOR
SYNCHRONIZATION
308 SELECTION OF STD/NON-STD
FOR COMPOSITE VIDEO IN
310 REC INHIBIT
311 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH1
312 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH2
313 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH3
314 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH4
317 AUDIO EDIT MODE
320 DIGITAL AUDIO PB PROCESS ON
EDIT POINT
329 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH5
330 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH6
331 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH7
332 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH8
Menu items in the 300s, relating to editing operations
Settings
Select the playback speed range when carrying out playback in variable
speed mode from a remote control unit connected to the REMOTE
connector.
–2~+2: –2 to +2 times normal speed.
wide: –2.20 to +2.20 times normal speed.
Select the STD or NON-STD mode in accordance with a composite
video or S-video input.
STD (forced STD): The STD mode is always used (forced STD mode).
N-STD (forced non-STD): Use this setting when the input video signal is
unstable (forced NON-STD mode).
Note
When using a VCR with no built-in time base corrector (e.g. a home-use
VHS-system VCR), select N-STD.
Select whether recording is inhibited.
off: Do not inhibit recording.
on: Inhibit recording.
Select methods for setting the edit presets of the digital audio channels
CH1 to CH4 of this unit. Make these settings when using an editor (PVE-
500, BVE-600, etc.) or remote control unit without a function to control
digital audio edit presets.
The edit presets of the digital audio channels of this unit are turned on
and off according to the specified analog audio presets of the editor or
remote control unit.
nodef (no definition): No definition
ch 1 (analog ch1): Follow the edit preset of analog channel 1.
ch 2 (analog ch2): Follow the edit preset of analog channel 2.
ch1+2 (analog ch1+ch2): Follow the edit preset of analog channel 1 or
2.
(The default settings for each item are as follows)
311: ch 1 (analog ch1)
312: ch 2 (analog ch2)
313: nodef (no definition)
314: nodef (no definition)
Select the type of transition for audio editing.
cut (cut edit): Cut editing (Audio is discontinuous at edit points, and
noise may occur during playback.)
cross (cross fade): Cross-fade (Processing time 10ms)
Select the treatment of audio playback at edit points.
cut: Carry out a cut (possibly resulting in audio discontinuities at the edit
point).
fade: Fade out and fade in.
Select methods for setting the edit presets of the digital audio channels
CH5 to CH8 of this unit. Make these settings when using an editor (PVE-
500, BVE-600, etc.) or remote control unit without a function to control
digital audio edit presets.
The edit presets of the digital audio channels of this unit are turned on
and off according to the specified analog audio presets of the editor or
remote control unit.
nodef (no definition): No definition
ch 1 (analog ch1): Follow the edit preset of analog channel 1.
ch 2 (analog ch2): Follow the edit preset of analog channel 2.
ch1+2 (analog ch1+ch2): Follow the edit preset of analog channel 1 or
2.
111
8-3 Extended Menu