Sony XDCAM PDW-1500 Operation Manual page 117

Item number Item name
710 INTERNAL VIDEO SIGNAL
GENERATOR
713 VIDEO SETUP REFERENCE
Sub-item
1 INPUT LEVEL
2 OUTPUT LEVEL
715 VIDEO GAIN CONTROL
716 CHROMA GAIN CONTROL
717 CHROMA PHASE CONTROL
718 SETUP LEVEL (525(U)/525(J) line
modes)/BLACK LEVEL (625 line
mode)
719 SYSTEM PHASE SYNC
720 SYSTEM PHASE SC
723 INPUT VIDEO BLANK
Sub-item
1 ALL LINE
2 ... 10 LINE 12 ...
LINE 20
2 ... 15 LINE 9, 322 ...
LINE 22, 335
Menu items in the 700s, relating to video control
Settings
Select the test signal to be output from the internal test signal generator.
When "SG" is selected using the VIDEO INPUT SEL button, the internal
test signal generator operates to output the selected test signal. This
signal can also be recorded.
BB (Black Burst): Black burst signal
CB75 (75% Color Bars): 75% color bar signal
CB100 (100% Color Bars): 100% color bar signal
The factory default settings for each line mode are as follows:
In 525(U)/525(J) line modes: CB75 (75% Color Bars)
In 625 line mode: CB100 (100% Color Bars)
Select whether to remove the setup (7.5%) from the input analog video
signals and whether to add the setup (7.5%) to the output analog video
signals (when 525(U) or 525(J) line mode is selected).
Whether to remove the setup (7.5%) from the input analog video signals.
0.0%: Do not remove.
7.5%: Remove.
The factory default settings for each line mode are as follows:
525(U) line mode: 7.5%
525(J) line mode: 0.0%
Whether to add the setup (7.5%) to the output analog video signals.
0.0%: Do not add.
7.5%: Add.
The factory default settings for each line mode are as follows:
525(U) line mode: 7.5%
525(J) line mode: 0.0%
Adjust the video output level.
–512 to 0 to 511
Adjust the chroma output level.
–512 to 0 to 511
Adjust the chroma phase.
–128 to 0 to 127
Adjust the setup level (black level).
–512 to 0 to 511
Adjust the output signal sync phase.
–128 to 0 to 127
Adjust the output signal subcarrier phase.
0 to 511
Switch blanking on or off for individual lines in the vertical blanking
interval of an input video signal. The Y/C signal and odd/even fields are
blanked simultaneously.
A signal with blanking carried out according to this setting is recorded.
- - -: Specify the blanking for each line separately.
blnk (blank): Regardless of the setting of other sub-items, blank all lines
which can be specified in this menu item.
thru (throu): Regardless of the setting of other sub-items, switch off
blanking for all lines which can be specified in this menu item.
In 525(U)/ Specify blanking for lines 12 to 20.
525(J) blnk (blank): Carry out blanking.
line thru (throu): Switch off blanking.
modes
In 625 line Specify blanking for lines 9, 322 to 22, 335.
mode blnk (blank): Carry out blanking.
thru (throu): Switch off blanking.
117
8-3 Extended Menu