Table of Contents
Advertisement
Options
Option
Auto Source
Input
Auto Power Off (Min)
Laser Settings
High Altitude
Filter Alarm (Hour)
Information
DHD410S User Manual
020-001438-01 Rev. 1 (06-2018)
Options
Auto Source
Input
Auto Power Off (Min)
Laser Settings
High Altitude
Filter Alarm (Hour)
Information
Select
Description
•
On: The projector will search for other signals if the current input signal is lost.
•
Off: The projector will only search current input connection.
Press Right arrow to enable/disable input sources. The projector will not search for
inputs that are not selected.
Sets the countdown timer interval. The countdown timer will start, when there is no
signal being sent to the projector. The projector will automatically power off when the
countdown has finished (in minutes).
See
Options > Laser Settings
•
On: The built-in fans run at high speed. Select this option when using the projector at
altitudes above 2500 feet/762 meters or higher.
•
Off: The built-in fans automatically run at a variable speed according to the internal
temperature.
•
Filter Alarm (Hour): Set the filter reminder time.
•
Cleaning Up Reminder: Select Yes to reset the dust filter hour counter after replacing
or cleaning the dust filter .
Display the projector information for model name, SNID, source, resolution, software
version, and aspect ratio on the screen.
On
Off
Enter
Back
on page <$elempagenum
User Controls
25
Advertisement
Table of Contents
