Christie DHD410S User Manual page 12

8 Zoom in
9 Reset
10 Auto
11 Input
12 Zoom out
13 Volume +/-
14 Keystone +/-
15 Image
16 Picture Mute
17 Aspect ratio
18 VGA1
19 HDMI1
20 VGA2
21 HDMI2
22 Video
23 Screen freeze
DHD410S User Manual
020-001438-01 Rev. 1 (06-2018)
Zoom in the projector display.
Return the adjustments and settings to the factory default values (except for
counter).
Automatically synchronizes the projector to the input source.
Press Input to select an input signal.
Zoom out the projector display.
Adjust to increase/decrease the volume.
Adjust image distortion caused by tilting the projector.
Select the display mode from Bright, PC, Movie, Game, and User.
Momentarily turns off/on the audio and
Use this function to choose your
Press VGA1 to choose VGA IN 1 connector .
Press HDMI1 to choose HDMI IN 1 connector.
Press VGA2 to choose VGA IN 2 connector .
Press HDMI2 to choose HDMI IN 2 connector.
Press Video to choose Composite video source.
Pause the screen image. Press again to resume the screen image.
video
re-quired aspect ratio.
Introduction
light
12