4.2.6
Logo
Use this function to set the desired startup screen. If changes are made they
will take effect the next time the projector is powered on.
•
Default: The default startup screen.
•
User: Use stored picture from "Screen Capture" function.
Screen Capture
Press ► button to capture an image of the picture currently displayed on
screen.
NOTE:
For successful logo capture, ensure that the on-screen image does not exceed the projector's native
resolution. (1080P : 1920x1080 / UWHD : 1920x720).
"Screen Capture" is not available when 3D is enabled.
Before active this function, it is recommended that "Aspect Ratio" is set to the "Auto".
Auto Source
•
On: The projector will search for other signals if the current input signal is
lost.
•
Off: The projector will only search current input connection.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-01 Rev. 1 (07-2015)
Options
Section 4: USeR CoNTRolS
options
Logo
Default
Screen Capture
Auto Source
On
Input
Auto Power Off (Min)
Laser Settings
High Altitude
Off
Filter Alarm (Hour)
Information
Select
Enter
Screen capture in progress...
Please Wait.
Back
33