Table of Contents
Advertisement
•
Low Voltage Directive 2006/95/EC
•
R & TTE Directive 1999/5/EC (if product has RF function)
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure
utmost protection of the global environment, please recycle it.
Wall mount installation
Warning! Failure to comply with the following could result in death or serious injury.
• If you buy a wall mount from another company, be sure to use the correct screw size. Screw size
will vary depending on the thickness of the mounting plate.
• Be sure to keep at least 10 cm gap between the wall and the bottom of the projector.
• Avoid installing the projector near a heat source.
Damage resulting from incorrect installation will void the warranty.
1. To prevent damage to your projector, please use wall mount (140-120104-XX/ 140-120115-XX).
2. If you want to use a third-party wall mount kit, ensure the screws used to attach a mount to
the projector meet the following specifications:
•
Screw type: M4*4
DHD410S User Manual
020-001438-01 Rev. 1 (06-2018)
Appendices
47
Advertisement
Table of Contents
