Philips 32PF9968/10 Service Manual page 21

更多难得资料请到江南家电维修论坛免费下载！
http://bbs.520101.com
• Volume. Indicates the last status of the volume for the
selected preset as set by the customer: from "0" to "100".
See DFU on how to change this item.
• Balance. Indicates the last status of the balance for the
selected preset as set by the customer: from "-10" to "+10".
See DFU on how to change this item.
• Preset Lock. Indicates if the selected preset has a child
lock: "LOCKED" or "UNLOCKED". See DFU on how to
change this item.
• Lock after. Indicates at what time the channel lock is set:
"OFF" or e.g. "18:45" (lock time). See DFU on how to
change this item.
• TV ratings lock. Indicates the "TV ratings lock" as set by
the customer. Change via "MENU", "TV", "CHANNELS",
"TV RATINGS LOCK". Possible values are: "ALL",
"NONE", "TV-Y", "TV-Y7", "TV-G", "TV-PG", "TV-14" and
"TV-MA".
• Movie ratings lock. Indicates the "Movie ratings lock" as
set by the customer. Change via "MENU", "TV",
"CHANNELS", "MOVIE RATINGS LOCK". Possible values
are "ALL", "NR", "G", "PG", "PG-13", "R", "NC-17" and "X".
• V-Chip TV status. Indicates the setting of the V-chip as
applied by the selected TV channel. Same values can be
shown as for "TV RATINGS LOCK".
• V-Chip movie status. Indicates the setting of the V-chip
as applied by the selected TV channel. Same values
can be shown as for "MOVIE RATINGS LOCK".
• Region rating status (RRT). Displays the Rating Region
Table.
• Region rating enabled. Indicates if the ratings are
enabled.
• Table channel changed. Indicates if the table has been
changed at broadcast side.
• On timer. Indicates if the "On timer" is set "ON" or "OFF"
and when it is set to "ON", also start time, start day and
program number is displayed. See DFU on how to change
this item.
• Location. Gives the last status of the location setting as
set via the installation menu. Possible values are "SHOP"
and "Home". If the location is set to "SHOP", several
settings are fixed. So for a customer location must be set
to "HOME". Can be changed via the installation menu (see
also DFU).
• HDMI key validity. Indicates if the HDMI keys (or HDCP
keys) are valid or not. In case these keys are not valid and
the customer wants to make use of the HDMI functionality,
the SSB has to be replaced.
• TV System. Gives information about the video system of
the selected transmitter. In case a DVBT signal is received
this item will also show ATSC.
– BG: PAL BG signal received
– DK: PAL DK signal received
– L/La: SECAM L/La signal received
– I: PAL I signal received
– M: NTSC M signal received
– ATSC: ATSC signal received
• 12NC one zip SW. Displays the 12NC number of the one-
zip file as it is used for programming software in production.
In this one-zip file all below software version can be found.
• Initial main SW. Displays the main software version which
was initially loaded by the factory.
• Current main SW. Displays the built-in main software
version. In case of field problems related to software,
software can be upgraded. As this software is consumer
upgradeable, it will also be published on the Internet.
Example: Q531U_1.2.3.4.
• Flash utilities SW. Displays the software version of the
software which contains all necessary components of the
download application. To program this software, EJTAG
tooling is needed. Example: Q531U_1.2.3.4.
• Standby SW. Displays the built-in stand-by processor
software version. Upgrading this software will be possible
via ComPair or via USB.(see chapter Software upgrade).
Example: STDBY_3.0.1.2.
• MOP SW. Displays the MOP software version.
Service Modes, Error Codes, and Fault Finding Q523.1U LA
• Pacific 3 Flash SW. Displays the Pacific 3 software
version.
• NVM version. Displays the NVM version as programmed
by factory.
• Display parameters. for development purposes only.
• Private PQ parameters. for development purposes only.
• Public PQ parameters. for development purposes only.
• Ambilight parameters. for development purposes only.
• Acoustics parameters. for development purposes only.
• DFI software (if applicable). Displays the DFI EPLD
software.
• DFI ambilight software. Not applicable for US.
How to Exit CSM
Press "MENU" on the RC-transmitter.
5. EN 21