Philips 32PF9968/10 Service Manual page 135

更多难得资料请到江南家电维修论坛免费下载！
http://bbs.520101.com
8.4.4 Opt. No. (Option numbers)
Select this sub menu to set all options at once (expressed in
two long strings of numbers).
An option number (or "option byte") represents a number of
different options. When you change these numbers directly,
you can set all options very quickly. All options are controlled
via eight option numbers.
When the NVM is replaced, all options will require resetting. To
be certain that the factory settings are reproduced exactly, you
must set both option number lines. You can find the correct
option numbers on a sticker inside the TV set and in Table
"Option code overview".
Example: The options sticker gives the following option
numbers:
• 04368 00005 01066 08707
• 00000 00032 00512 00000
The first line (group 1) indicates hardware options 1 to 4, the
second line (group 2) indicates software options 5 to 8.
Every 5-digit number represents 16 bits (so the maximum value
will be 65536 if all options are set).
When all the correct options are set, the sum of the decimal
values of each Option Byte (OB) will give the option number.
See table "Option code overview" for the options.
Table 8-5 Option code overview
CTN Options Group 1
41226 03077 08535 46707 24896 00064 00000 00000
42PFL7422D/37
41386 03333 08535 46707 24896 00064 00000 00000
42PFL7432D/37
47PFL7422D/37 41226 03077 08535 46707 24913 00064 00000 00000
41386 03333 08535 46707 24913 00064 00000 00000
47PFL7432D/37
47PFL5432D/37 41226 02053 08535 46707 24913 00064 00000 00000
47PFL9732D/37_1 41386 03334 08535 13939 24895 00064 00000 00000
47PFL9732D/37_2 41386 03334 08535 13939 24933 00064 00000 00000
52PFL7422D/37 41226 03078 08535 13939 24930 00064 00000 00000
52PFL7432D/37 41226 03333 08535 13939 24930 00064 00000 00000
52MF437B/37 41226 03078 08535 13875 24930 00064 00000 00000
52MF437S/37 41226 03078 08535 13875 24930 00064 00000 00000
Important: after having edited the option numbers as
described above, you must press OK on the remote control
before the cursor is moved to the left!
8.5 Reset of Repaired SSB
A very important issue towards a repaired SSB from a service
repair shop, implies the reset of the NVM on the SSB.
A repaired SSB in service should get the service Set type
"00PF0000000000" and Production code "00000000000000".
Also the virgin bit is to be set. To set all this, you can use the
ComPair tool.
Displ.
Options Group 2
code
064
064
081
081
081
063
101
098
098
098
098
Alignments Q523.1U LA 8. EN 135