Table of Contents
Advertisement
RFID TAG/CARD READER
Infinea X Mini comes with a built-in RFID tag/card reader. The RFID reader incorporates several RFID
formats, depending on the model of your Infinea X Mini. The RFID receiver/transmitter is located on the
back of the device, below the LEDs and is denoted by the WiFi symbol.
To use the RFID reader:
1.
Press the contactless card reading option in the application on the iOS screen.
2.
Place the RFID tag/card over the RFID label on the transmitter/receiver, keeping the face of the
tag/card flat with the receiver/transmitter as close as possible.
The data will be read and sent from the Infinea X Mini contactless reader to the iOS Device.
Depending on the type of RFID tags/cards being used, it may be necessary for tags/cards to make direct contact with
the surface where the RFID receiver/transmitter is located for proper reading/writing.
Infinea® X Mini User Manual
UM-00013 Rev B
Figure 12: Contactless Card Reader
Page 22 of 31
Advertisement
Table of Contents
Need help?
Do you have a question about the INFINEA X mini and is the answer not in the manual?
Questions and answers