How To Return Master Unit To Factory Setting - Omron A2W-R**-WC1 Series User Manual

8 Trouble Shooting
Error Clear Input
1
Make short the Master Unit error clear terminal to 0 V.
Power supply terminals
(Upper left part of Master Unit)
The voltage between the error clear terminal and 0 V must be 15 VDC or less to reset the error.
The error clear terminal and 0 V are the Push-In Plus terminals.
2
The error is reset.
8-2-3

How to Return Master Unit to Factory Setting

The Master Unit can be restored to the factory setting by the following method.
1
Turn OFF the power supply to the Master Unit.
2
With the reset button pressed, Turn ON power to the Master Unit again.
3
The setting information is initialized and it returns to the factory setting.
8 - 6
Error clear terminal
Wireless Pushbutton Switch User's Manual (A265)