Page 1
• Easy mounting and removal of Switch Unit. • Increase wiring efficiency with three-row mounting of Switch Blocks. • Finger protection mechanism on Switch Unit provided as a standard feature. • Use 25-dia. ring to install in 25-dia. panel cutouts.
Page 2
Subassembled The Selector, Lamp, or Switch can be ordered separately. Use them in combination for models that are not available as assembled Units. These can also be used as inventory for maintenance parts. 1. Selector A22K-@ 1 Number of Notches/Reset Method...
Page 4
Note: DPST-NO + DPST-NC combination is also possible. Accessories Appearance Model A22K-K Note: Two keys are provided. Accessories The A22K uses the same accessories as the A22. Refer to the relevant information in the corresponding section for the A22. A22K G-110 Key-type Selector Switch...
Specifications With the exception of the following items, the specifications are the same as for the A22. Refer to the relevant information in the Specifications section for the A22. ■ Operation Angle 2 notches 3 notches Note: 1. The angles in parentheses are for automatic-reset models.
Page 6
■ Key-type Selector Switch A22K 30 dia. ■ Accessories The A22K uses the same accessories as the A22. Refer to the relevant information in the corresponding section for the A22. ■ Terminal Arrangement (Bottom View) Non-lighted (SPST-NO + SPST-NC) M3.5 screw...
The A22K uses the same installation method as the A22. Refer to the relevant information in the Installation section for the A22. Precautions The precautions for the A22K are the same as those for the A22. Refer to the relevant information in the Precautions section for the A22 and the Technical Information for Pushbutton Switches (Cat. No. A143).
Page 8
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. Cat. No. A130-E1-02 A22K G-114...