4 Installation and Wiring of the Master Unit
4-2
Installing Master Units
This section describes how to install the Master Units.
Mounting on the DIN rail or screw mounting on the wall can be used for installing the Main Units.
4-2-1
DIN Rail Installation
Secure each DIN rail inside a control panel with at least three screws.
Secure the DIN Rail
Recommended DIN rail
Model
PFP-100N
PFP-50N
DIN Rail End Plates PFP-M (2 required)
4 - 6
Dimensions
1,000 mm
500 mm
Manufacturer
OMRON
Wireless Pushbutton Switch User's Manual (A265)