Omron A2W-R**-WC1 Series User Manual page 32

2 Overview
LED
Color
name
OUTPUT Yellow
1 to 8
ERR Red
 Each State Corresponding to the Combination of "ERR" LED and "RCV" LED
In the RUN Mode or the TEST Mode
ERR
Lit red
Not lit
ID Mode
ERR
Lit red
Not lit
Note The strength of receiving field (RCV) will also flash green even if you select an output number that is not
registered as ID and try to erase or reset.
2 - 12
Enabled
Status
mode
RUN/TEST Lit Data is received from the ID assigned to the corresponding output
Not lit Data is not received from the ID assigned to the corresponding output
ID Lit Reads corresponding output settings switch values 1 to 8
All lit Reads output settings switch value DEL
All not lit Reads output settings switch value ERR CLR
Always Lit Error in CPU initialization processing at startup, or in Master Unit setting
enabled data, or in the most important function (wireless received, registration/verifi-
cation, or output)
Not lit No Master Unit error
RCV
Lit green Master Unit setting data error
Lit yellow The most important function error
Not lit CPU initialization processing error
Lit green No Master Unit error and with reception.
Received field strength: "Strong".
Lit yellow No Master Unit error and with reception.
Received field strength: "Weak".
Not lit No Master Unit error and without reception.
RCV
Lit green Master Unit setting data error
Lit yellow The most important function error
Not lit CPU initialization processing error
Lit green No Master Unit error, and ID registration success or ID deletion success
Flashing green No Master Unit error, and ID registration failure or ID deletion failure
Not lit No Master Unit error, and no data reception for ID registration or no data
reception for ID deletion
Meaning
Status
Status
Wireless Pushbutton Switch User's Manual (A265)