Omron A2W-R**-WC1 Series User Manual page 73

 Procedure
1
Set the "mode settings switch" of the Master Unit to "ID" (ID mode).
Mode settings switch
2
Set the "Output settings switch" of Master Unit to one of the ID "1" to "8" of the Slave button
you want to delete.
Output settings switch
3
The output LED (e.g., OUTPUT 1) of the Master Unit will turn yellow.
OUTPUT 1 turns yellow.
4
Continue to hold the reset switch of the Master Unit.
Reset switch
5
The RCV LED of the Master Unit will light green for 3 seconds.
RCV LED
6
Delete complete.
Wireless Pushbutton Switch User's Manual (A265)
ID
Example 1
Output LED
Lit green for 3 seconds.
5 Registration in the ID Mode
5
5 - 11