Omron A2W-R**-WC1 Series User Manual page 72

5 Registration in the ID Mode
Delete ALL the Slave Buttons Registered to the Specific Output
Together
Delete operation is performed only on the Master Unit side.
When multiple Slave buttons are registered in the output No. of the Master Unit to be deleted, multiple
Slave buttons are deleted together.
 Operation Procedure Flowchart
< Master Unit>
Delete start
1. Set the mode
settings switch
to "ID".
2. Set the output
settings switch to
"1", for example.
3. The output
LED (example:
OUTPUT 1)
lights in yellow.
4. Press and hold
the reset switch.
5. Delete complete
5 - 10
RCV LED does not light green.
The RCV LED lights
green for 3 seconds.
Deletion failure
* Retry the operation
* Check whether it is registered in the Slave button as the
output No. to be deleted (originally, the Slave button is not
registered in the output No.).
Wireless Pushbutton Switch User's Manual (A265)