Siemens FM 458-1 DP Manual page 71

SIMOLINK drive coupling
I/O
TAD Hardware address SLB (name of the SLB module), which can be
configured in HWConfig
FSL Address of the first slave to which setpoint XS0 should be sent,
value range 1 . . . 200
(initialization connection)
Number of slaves to which the setpoint should be sent,
NSL
value range 1. . . 8
(initialization connection)
Number of the channel on which the setpoint is sent,
CSV
value range 0 . . . 7
(initialization connection)
Setpoint XS for slaves 1 to 8,
XS0
A maximum of 8 setpoints can be sent.
to
XS7
SEQ Sequence number
Number of the blocks in the SIMOLINK block sequence
This value provides information as to whether the block was correctly
initialized.
YF Error status of the block
YF=0 no error, YF > refer to coded error output @SL
Group error bit
QF
QF=0 no error, QF=1 for error (if YF≠0)
Configuringdata
5-14
Computation time [µs]
Can be inserted online
Can be configured in
Executed in
Special features
FM 458-1 DP 34,7
No
Interrupt tasks
Cyclic tasks
Initialization mode
Normal mode
-
Function Blocks - FM 458-1 DP
(default: 1)
(default: 1)
(default: 0)
(default: 0)
(default: 0)
(default: 0)
(default: 0)
Edition 12.2004