Siemens FM 458-1 DP Manual page 43

Diagnose outputs:
QTS Block status:
•
QTS=1: Block is operational and is operating error-free.
•
QTS=0: Block is shutdown due to a fault with an error output at YT1/2
(Default: 0)
YT1 •
YT1=0: OK status
•
Initialization mode: status of the block initialization
•
Standard mode: Status of the 1
For additional values, refer to: D7-SYS online help "Help on Events". (press
the F1 key in the CFC and call-up the topic "Help on events"
under "CFC for D7-SYS".)
(Default: 0)
•
YT2
YT2=0: OK status
•
Intialization module: Status of the block initialization
•
Standard mode: Status of the 2
For additional values, refer to: D7-SYS online help "Help on events". (press key F1 in the
CFC and call-up the topic "Help on events"
under "CFC for D7-SYS".)
(Default: 0)
Configuringdata
Function Blocks - FM 458-1 DP
Edition 12.2004
Computation time [µs]
Can be inserted online
Can be configured in
Executed in
Special features
st
parameter channel from COMBOARD
nd
parameter channel of COMBOARD
FM 458-1 DP
--
Cyclic tasks
Initialization mode
Normal mode
•
10<=sampling time<=200 ms
•
Block may not be switched-in or
switched-out per task group.
Communication blocks
3,3
2-31