Siemens FM 458-1 DP Manual page 17

DL2
Overview of with which slave data transfer took place. This output
is bit-coded. Every bit is assigned to a slave with its Profibus
address. For example, bit 0 of the 32-bit word is assigned to the
slave with Profibus address 32.
For a more detailed description, refer to the user manual
"FM 458-1 DP", chapter "Configuring", section "PROFIBUS DP
coupling".
DL3
Overview of with which slave data transfer took place. This output
is bit-coded. Every bit is assigned to a slave with its Profibus
address. For example, bit 0 of the 32-bit word is assigned to the
slave with Profibus address 64.
For a more detailed description, refer to the user manual
"FM 458-1 DP", chapter "Configuring", section "PROFIBUS DP
coupling".
DL4
Overview of with which slave data transfer took place. This output
is bit-coded. Every bit is assigned to a slave with its Profibus
address. For example, bit 0 of the 32-bit word is assigned to the
slave with Profibus address 96.
For a more detailed description, refer to the user manual
"FM 458-1 DP", chapter "Configuring", section "PROFIBUS DP
coupling".
MST Status of the DP master:
Stop (0x40 ), Clear (0x80) or Operate (0xC0)
ID Master identification number:
(0x8037 for EXM448 as Profibus interface, 0x80EB when
using X3 of the FM458-1)
QTS Block output QTS is used to display whether the block is operating
error-free (QTS = 1) or was de-activated after a communications
error message was entered (QTS = 0).
YTS
Detailed status display:
•
YTS=0
•
YTS=1
For additional values at YTS, refer to: D7-SYS Online Help "Help
events". (Press the F1 button in the CFC and call the topic
"Help on events" under "CFC for D7-SYS".)
Configuring data
Function Blocks - FM 458-1 DP
Edition 12.2004
o.k.
Block processing inhibited (EN=0)
Computation time [µs]
Can be inserted online
Can be configured in
Executed in
Special features
FM458-1 DP 42,7
No
Cyclic tasks
Initialization mode
Normal mode
This function block may only be configured
once for each PROFIBUS communications
module.
Communication blocks
(Default: 0)
(Default: 0)
(Default: 0)
(Default: 0)
(Default: 0)
(Default: 0)
(Default: 0)
2-5