Siemens FM 458-1 DP Manual page 31

QF Error status block
QF=1: There is an error; for details, refer to YF
YF StatusInfo Block
§§ as for the DRD block!
Configuring data
Function Blocks - FM 458-1 DP
Edition 12.2004
Computation time [µs]
Can be inserted online
Can be configured in
Executed in
Special features
FM 458-1 DP
Yes
Interrupt tasks
Cyclic tasks
Initialization mode
Normal mode
The block must be configured in the same
sampling time
as the blocks, connected via the pointer interface
(CFC connection via connections PTR).
This can only be used for the FM 458-1 DP!
Several S7WR_P blocks can be configured.
Although this is not a typical application, it can
make sense if, for example, the 128 byte area
should be written in several blocks or if data is
required in different sampling times.
Communication blocks
0.0
16#0000
5,0 + 0.7 for each byte
2-19