Progres AGRONIC 4000 Instruction Manual page 6

6
In the "box" model, the unit is held by the upper
pieces at the corners and by the two holes placed at
the below cover of the connection housing, according
to the measures shown in the section DIMENSIONS.
In the version with "box", the equipment is
provided in a hermetically sealed (box IP65) with a
4.2. CONNECTION PLACING
In order to carry out the connections in the unit of
the "built-in" model, access the connectors placed at
the back.
In the "box" model, take the below cover off to
access the connectors.
The necessary terminals have to be taken out to
enter the cables (do it with the connection cover on
transparent front cover for the keyboard/display and
an opaque cover for the connection housing.
In order to maintain isolation of the box it is
necessary to maintain the covers always closed, as
well as install grommets at the outputs of the cables.
and screwed, in order to avoid possible malfunc-
tions.).
It is advisable to link the cables to the terminals
with connection terminals, which are supplied with the
unit. (The terminals accept cables of up to 2.5 mm
section).
2 of