Progres AGRONIC 4000 Instruction Manual page 26

26
The data "Transmission speed" when linking to a
PC can be:
0 – 1200 bps
1 – 2400 bps
2 – 4800 bps
3 – 9600 bps
4 – 19200 bps
Communication with the PC :
Transmission speed : 0
The exit of the data to the PC is done from a "se-
rial port"; the Agrónic 4000 has already installed two
ports and it is possible to amplify with one additional
port.
- Port 1: Link RS232.
- Port 2: Link RS485, in two wires and galvanically
isolated.
- Port 3: Link RS232 (option).
- Port 0: Null, the communication remains dis-
abled.
The RS232 link is used with elements placed be-
side the controller or at a maximum of 30 meters and
the RS485 for several elements at a time and at dis-
tances of hundreds meters.
Communication with the PC:
Serial port : 1
The linking to a PC can be done by cable or "Via
modem", which can be a conventional one or GSM.
When the link is done by modem, the "modem con-
figuration" chain can be modified.
When linking via modem, a SIM card is required
in order to make calls (it is the same card used at the
mobiles).
In order to modify the texts the up/down arrow
keys have to be used and to move the cursor the
left/right arrow keys.
Communication with the PC :
Via modem : YES
Communication with the PC :
Modem configuration: ATEØVØSØ=2
Compatibility chart:
Link Port
1, 3
Link to PC
via cable
2
Link to PC
1, 3
via mo-
dem
Compatible with
--
- Other Agrónic 4000
- Microisis to PC (not to use
with A-4000)
- SMS messages
6.8.2. SMS messages sending
The SMS messages option is used to send SMS
messages to mobile phones, activity of the day re-
ports or messages about any event or anomaly. In
addition to this, text messages with operation orders
can be sent from the mobile telephone to the Agrónic.
The SMS messages are only applicable when the
modem or the telephone that sends or receives the
message uses the GSM technology.
Two different times of the day are allowed to send
a report; in it the irrigation starts carried out by each
program will be indicated. In order to avoid the send-
ing, leave the time at a 00:00.
SMS messages : YES
Report time 1 : 18:00
The "Services centre" number which has been
contracted to the GSM modem card connected to the
A-4000 has to be entered.
SMS messages : YES
Services centre : 340000000000
The destiny number corresponds to the tele-
phone which will receive the message. The numbers
have to be initiated by the country code.
SMS messages : YES
Destiny telephone : 340000000000
The "Transmission speed" can be:
0 – 1200 bps
1 – 2400 bps
2 – 4800 bps
3 – 9600 bps
4 – 19200 bps
SMS messages: Y.
Transmission speed : 0
It is necessary to enter the serial port number
which will communicate with the modem. Look at sec-
tion "6.8.1" for further information about the ports.
SMS messages: Y.
Serial port : 1
Compatibility chart:
Link Port
1, 3
SMS
messages
2
Compatible with
Link to PC via GSM modem
-