General View - Progres AGRONIC 4000 Instruction Manual

12. VIEW
To go into this section press the "View" key. We
will find detailed information about what the controller
is doing.->
Look at the resume:
The last visited programs and general view
screen is always recorded. This is why when coming
from "Functions" or "View" it will show again the last
screen seen when exiting the "View".
When a "View" automatically enters after a power
cut, it is done through the first screen of the general
view.

12.1. GENERAL VIEW

The general view is formed by a series of screens
with resumed information of the system general opera-
tion.
The first screen shows the clock information
from the seconds to the year.
The second line usually informs about the new
anomalies which have taken place since the previous
reading, in the same line it also informs if there are
some program out of service. When a malfunction or a
manual action of the next list which is shown at follow-
ing takes place, it will be shown intermittently in the
second line until the user repairs the anomaly or/and
-> There is a "General view" and a "Programs
view". To move in between the view screens use the
up and down arrow keys. To move from a general
view to a programs one or to do the opposite, use the
right and left arrow keys.
knows it by canceling it at "Function–Manual–
Malfunctions" [10].:
o General malfunction
o Flow malfunction
o Irrigation counter malfunction
o Fertilizer without control malfunction
o pH regulation malfunction
o Conductivity control malfunction
o Out of service
o At STOP
Monday 12/07/02 18:49.33
New anomalies : 03
Monday 12/07/02 18:49.33
Flow malfunction
The second screen inform about the programs
and sectors operating at that moment, all these in the
first line. If more than four programs are activated at a
time, it will be intermittently shown in groups of four.
Pro. OUT OF SERVICE
39