Progres AGRONIC 4000 Instruction Manual page 37

9. ERASURE
The ERASURE function will be used to cancel the
programming or the totals values. To do so, press the
"FUN" (functions) key, choose the function by its
number (3) and then press "Enter".
Programs : 1 Readings: 2
Parameters: 4 Manual : 5
The "Erasure" menu is the following:
ERASURE Programs : 1
Totals : 3
To exit any erasure screen press the "function" or
"View" keys.
Care has to be taken when using this function,
yet important values for the irrigation system working
can be cancelled.
At sector "1" the program number to be erased
will be asked, at sector "2" to erase the whole pro-
grams and at number "3" to erase all the totals. Con-
firmation of the erasure will always be requested.
Are you sure to erase? : NO
Erasure : 3
Clock : 6
All : 2
10. MANUAL
By using the manual function, the following can
be done:
Start the beginning of a program.
Stop a program that is irrigating.
Leave a program out of service; the values of the
irrigation which is taking place will be erased.
Remove a program from the out of service position.
Stop the system, that it can also be done with the
STOP key. The programs are postponed and the
outputs deactivated.
Stop the out of service, that can also be done with
the STOP key. The programs will reinitiate at the
same place where they stopped.
Set the Agrónic at out of general service, leaving
everything stopped and erasure the values of the
irrigations that are taking place out of the pro-
grams.
Exit the out of service.
Start the filter cleaning.
Finish the filter cleaning.
Finish the stop by general malfunction.
Finish the stop by flow malfunction.
Finish the stop by counter malfunction.
Finish the stop by fertilizer without control.
Finish the definitive stop of the sectors.
Reinitiate the injection by error in the fertilizers pro-
portions.
Finish the stop of the filters by filter out of control
malfunction.
Finish the activation of the general alarm outputs,
fertilizer or acid.
Finish the stop of the alarm by EC.
Finish the stop of the injection by pH alarm.
To do so, press the "FUN" key, choose the option
by its number (5) and then press "Enter".
Programs : 1 Readings : 2
Parameters: 4 Manual : 5
The "Manual" menu is the following:
MANUAL Out of service : 1
Programs : 3 Malfunctions : 4
MANUAL Outputs : 6
To exit any manual screen press the "Function"
or "View" keys.
It is possible to move to another screen from the
"Out of service" sector in order to do a general or a
program one.
37
Erasure : 3
Clock : 6
STOP : 2
Filters : 5