Installation; Placing The Unit - Progres AGRONIC 4000 Instruction Manual

3. DIMENSIONS

4. INSTALLATION

4.1. PLACING THE UNIT

Place the unit at the right position and height.
Avoid direct sun exposure, humidity, dust and
vibrations.
Avoid proximity to any source of interference
which could affect the correct operation of the unit.
The A-4000 is made up of just one piece, except
the built-in models with more than 32 outputs, which
go with a second box.
In the "built-in mo-
del", a hole is to be
done in the frontal part
of the wall or desk,
according to the mea-
sures in the section
DIMENSIONS. It will be
held with the screws of
the corners, using the
four pieces which are included in the unit.
The wardrobe must have a double isolation with
protection for the operation relationship to the net
power supply circuit.
5