Progres AGRONIC 4000 Instruction Manual page 30

30
7. PROGRAMS
To accede to the irrigation programming press
the "FUN" (functions) key, choose number 1and then
press "Enter".
Look at an example of a program resume:
The Agrónic 4000 has 40 independent programs
with 12 sub-programs or irrigation sequences at each
of them.
The number next to the P, at the left of the upper
line of the screen, indicates the number of program.
The number of the sub-program is indicated after a
hyphen.
When 00 is set at the sub-program number it will
correspond to the program starting conditions (P01-
00).
The value P01-01 would be the first sub-program
to enter when the irrigation program started and the
P01-12 would be the last one. In necessary programs
can be enchained forming sequences of 24, 36, 48,
etc.
Inside the sub-programs there can be some
empty ones or irrigation units without value. They will
be automatically passed over when dealing with the
irrigation sequence.
Example of an irrigation program:
P01-00 SMTWTFS
Pre/Post = 010/030
P01-01 S33 05 .. .. .. .. .. .. .. ..
I 02:17 F1 0023 F2 0108 L
Start = 15:10
F=+04% 00/00 to 00/00
Programs : 1 Readings : 2
Parameters: 4 Manual
The values of a program are the next:
On the first screen at the upper line there is the
program number and the sub-program P01-00
number. Being the sub-program 0, the values of this
screen correspond to starting conditions.
At the middle of the line, as an standard, the
days of the week when it will work are shown. In
order to discharge or dismiss a day, press the keys
marked with the days of the week (the daily key acti-
vates and deactivates all the days).
With the cursor at this position and pressing the
"MODE" key, we will cancel the activation by days of
the week and it will pass to work by "frequency" of
days. The entered value corresponds to the days it
will take between one irrigation and another. 1 would
be a daily irrigation, 2 for alternative days and 3 for an
irrigation every 3 days, etc.
The value at the right which is in brackets corre-
sponds to the days real counter: when it arrives at 0
is when the program can work. It has to be taken into
account that this value in brackets works automati-
cally when arriving at 0 and when the days changes it
takes the value of the days it will be without irrigating.
Examples:
Frequency: 01(00) every day.
02(00) every two days, irrigating today.
02(01) every two days, irrigating tomorrow.
05(04) every 5 days, it will be 4 days
without irrigating.
Erasure: 3
: 5 Clock : 6