Example Type Plate: Protec Gm 1-530; Basic Safety Instructions; Safety Instructions For The Operator - WAGNER PROTEC GM 1-530 Translation Of The Original Operating Manual

VERSION 07/2017
OPERATING MANUAL
3.4

EXAMPLE TYPE PLATE: PROTEC GM 1-530

Designation
1 Wagner International AG
2 Serial number
3 Production date (month/year)
4 Spray gun designation
5 Maximum product pressure
6 Maximum product temperature
7 * Keep clear of nozzle
8 * Maximum product pressure
9 * Injection hazard
10 Warning
11 Skin injection hazard/Read
instruction manual
12 Fire and explosion hazard/read
operating manual
13 "Warning – Hot surface!"
* For nozzle holder PT-HD GM1
4

BASIC SAFETY INSTRUCTIONS

4.1

SAFETY INSTRUCTIONS FOR THE OPERATOR

Keep this operating manual at hand near the device at all times.
Always follow local regulations concerning occupational safety and accident
prevention.
4.1.1 ELECTRICAL DEVICES AND EQUIPMENT
Electric shock hazard!
Danger to life from electric shock
Prepare device in accordance with the local safety requirements with regard to the
operating mode and ambient influences.
May only be maintained by skilled electricians or under their supervision. With open
housings, there is a danger from line voltage.
Operate device in accordance with the safety regulations and electrotechnical
regulations.
Must be repaired immediately in the event of problems.
Decommission if it poses a hazard or is damaged.
Must be de-energized before work is commenced. Inform staff about planned work.
Observe electrical safety regulations.
Ground all devices to a common grounding point.
Only operate the device with a properly installed socket with a protective ground
wire connection.
Keep liquids away from electrical devices.
ORDER NUMBER DOC 2349369
II 2G X
7
KEEP CLEAR OF TIP
8
53 MPa 7700 psi
9
INJECTION HAZARD
10
WARNING
SKIN INJECTION HAZARD
11
READ INSTRUCTION MANUAL
FIRE AND EXPLOSION HAZARD
12
READ INSTRUCTION MANUAL
1
Wagner Int. AG
4
CH-9450 Altstaetten
2
Serial-No. XXXXX 5
MAX WPR
3
MM/JJ
530 bar
SWISS MADE 7700 psi
PROTEC
GM 1-530
6
MAX TEMP
85 °C
185 °F
13
B_06752
7