About These Instructions; Preface; Warnings, Notices And Symbols In These Instructions - WAGNER PROTEC GM 1-530 Translation Of The Original Operating Manual

VERSION 07/2017
OPERATING MANUAL
12 ACCESSORIES
12.1 Nozzle for nozzle holder PT-HD GM1
12.2 Nozzle for nozzle holder WAGNER Tip 7/8 UNF
12.3 Nozzle for anti-contact guard 7/8 UNF
13 SPARE PARTS
13.1 How to order spare parts?
13.2 Spare Parts List PROTEC GM 1-350/530
14 GUARANTEE AND CONFORMITY DECLARATIONS
14.1 Important notes on product liability
14.2 Warranty claim
14.3 EU Declaration of Conformity
1

ABOUT THESE INSTRUCTIONS

1.1

PREFACE

The operating manual contains information about safely operating, maintaining, cleaning
and repairing the device.
The operating manual is part of the device and must be available to the operating and
service personnel.
The device may only be operated by trained personnel and in compliance with this
operating manual.
Operating and service personnel should be instructed according to the safety instructions.
This equipment can be dangerous if it is not operated according to the instructions in this
operating manual.
1.2

WARNINGS, NOTICES AND SYMBOLS IN THESE INSTRUCTIONS

Warning instructions in this operating manual highlight particular dangers to users and to
the device and state measures for avoiding the hazard. These warning instructions fall into
the following categories:
DANGER
WARNING
CAUTION
NOTICE
Note
ORDER NUMBER DOC 2349369
Immediate risk of danger.
Non-observance will result in death or serious injury.
Potential risk.
Non-observance may result in death or serious injury.
Potentially hazardous situation.
Non-observance may result in minor injury.
Potentially hazardous situation.
Non-observance may result in damage to property.
Provides information about particular characteristics and
how to proceed.
29
29
30
30
31
31
32
34
34
34
35
3