WAGNER PROTEC GM 1-530 Translation Of The Original Operating Manual page 24

VERSION 07/2017
OPERATING MANUAL
8.2.3 SAFETY CHECKS AND MAINTENANCE INTERVALS
Every day
Check grounding: see Chapter
Check hoses, tubes and couplings: see Chapter
Flush and clean the spray gun as described in Chapter 8.1.2.
Weekly
Check spray guns for damage.
Check the function of the safety fixtures (see Chapter 5.3):
– Anti-contact guard on nozzle holder.
– Guard bracket
– Trigger locking device must engage and block the trigger.
Yearly or as required
In accordance with DGUV regulation 100-500 Chapter 2.29 and 2.36:
– The liquid ejection devices should be checked by an expert (e.g., WAGNER
service technician) for their safe working conditions as required and at least
every 12 months.
– For shut down devices, the examination can be suspended until the next start-
up.
8.2.4 PRODUCT HOSES, TUBES AND COUPLINGS
The service life of the complete hoses between product pressure generator and application
device is reduced due to environmental influences even when handled correctly.
Check hoses, pipes, and couplings every day and replace if necessary.
Additionally, the operator must regularly check the complete hoses for wear and
tear as well as for damage at intervals that he/she has set. Records of these checks
must be kept.
The complete hose is to be replaced as soon as one of the two following intervals
has been exceeded:
- 6 years from the date of the hose crimping (see fitting embossing).
- 10 years from the date of the hose imprinting.
Fitting embossing
xxx bar
yymm
XX
Hose imprinting
WAGNER
yymm
xxx bar (xx MPa)
e.g., 270 bar (27 MPa)
XX
DNxx (e.g., DN10)
ORDER NUMBER DOC 2349369
6.4
8.2.4
Meaning
Pressure
Crimping date (year/month)
Internal code
Meaning
Name / Manufacturer
Date of manufacture (year/month)
Pressure
Internal code
Nominal diameter
24