Setting Etc And Ip To "Disp - Omron EQUO Series User Manual

(2)

Setting ETC and IP to "DISP"

Display
(Upper/Lower)
CYCLE
10s
("FUN" Blinking)
↓ ▽or △ Key
ETC
OFF
↓
SET/REC/STOP Key
ETC
OFF
↑Blinking
↓
▽or △ Key
ETC
DISP
↑Blinking
↓
SET/REC/STOP Key
ETC
DISP
↓
▽or △ Key
IP
OFF
↓
SET/REC/STOP Key
IP
OFF
↑Blinking
↓ ▽or △ Key
IP
DISP
↑Blinking
↓
SET/REC/STOP Key
IP
DISP
Press the ▽ or △ key until "ETC" appears at the upper row on
the display.
Press the SET/REC/STOP key. "OFF" at the lower row starts
blinking.
Press the ▽△ keys to display "DISP".
Press the SET/REC/STOP key to fix "DISP". Blinking stops.
Press the ▽or △ key to display "IP" at the upper row.
Press the SET/REC/STOP key. "OFF" at the lower row starts
blinking.
Press the ▽ or △ key to display "DISP".
Press the SET/REC/STOP key to apply "DISP". Blinking stops.
Proceed to the IP address setting procedure.
3-11
3. Check and Preparation
Operation