Changing Numeric Input Type Item Value (Example: Year) - Omron EQUO Series User Manual

(2)

Changing Numeric Input Type Item Value (Example: YEAR)

Press the MODE key several times to enter FUN mode, and press the ▽ or △ key to
display YEAR.
To display YEAR, ETC and TIME must have been set to DISP beforehand.
Display
(Upper/Lower)
CYCLE
10s
("FUN" Blinking)
↓
▽ or △ Key
Display
(Upper/Lower)
YEAR
2010
SET/REC/STOP Key
Display
(Upper/Lower)
YEAR
2010
↑Blinking
▽ or △ Key
Display
(Upper/Lower)
YEAR
2011
↑Blinking
SET/REC/STOP Key
Display
(Upper/Lower)）
YEAR
2011
Use the △ or ▽ key again to display other setting item and MODE key to change the
operation mode.
Press the MODE key repeatedly until "FUN" starts blinking.
"CYCLE" is displayed at the upper row.
Press the ▽ or △ key to display YEAR. To display YEAR, ETC
and TIME must be set to DISP.
Press the SET/REC/STOP key, then, the last digit number at the
lower row starts blinking.
↓
The value increases or decreases at a press of the △ or ▽ key.
The amount of increase/decrease becomes larger by holding △ or
▽ key.
To cancel the setting attempt, press the MODE key.
↓
Press the △ or ▽ key to display the desired value, and press the
SET/REC/STOP key.
The value is applied and the blinking stops.
↓
4-15
4. Setting the Unit (Unit Operation)
Operation
Operation
Operation
Operation
Operation