Changing The Set Value; Changing Option Type Item Value (Example: Cycle) - Omron EQUO Series User Manual

4.2.5 Changing the Set Value

The value setting depends on the type of items, which are classified into option selection
type and numeric input type.
(1)

Changing Option Type Item Value (Example: CYCLE)

Press the MODE key several times to enter FUN mode, and press the ▽ or △ key to
display CYCLE.
Display
(Upper/Lower)
CYCLE
10 s
SET/REC/STOP Key
Display
(Upper/Lower)
CYCLE
10 s
↑Blinking
Display
(Upper/Lower)
CYCLE
30 s
↑Blinking
SET/REC/STOP Key
Display
(Upper/Lower)
CYCLE
30 s
Use the △ or ▽ key again to display other setting item and MODE key to change the
operation mode.
Press the MODE key repeatedly until "FUN" starts blinking. Press
the ▽ or △ key to display CYCLE at the upper row of the display.
Press the SET/REC/STOP key, then, the value at the lower row
starts blinking.
↓
The value options are displayed in sequence by pressing the △ or
▽ key.
To cancel the setting attempt, press the MODE key.
▽ or △ Key ↓
Press the △ or ▽ key to display the desired value, and press the
SET/REC/STOP key.
The value is applied and the blinking stops.
↓
4. Setting the Unit (Unit Operation)
Operation
Operation
Operation
Operation
4-14