3.7.3 Mounting with Screw Hook Holes
There are two hook holes below the convex section of the upper unit for the product to be
secured on the wall. (Refer to the Appendix: Installation Diagram for the screw hooking hole
dimensions.)
M3 screws to hook the screw head on the screw hook holes. Attach the device with an interval
of 2.5 mm or more between the bottom of the screw head and the wall surface.
Important
Firmly hold the unit with your hands to insert or remove the SD memory card when the
unit is mounted by hooking. It may result in dropping and damaging SD memory card.
2.5 mm or more
Enlarged Hook Screw Section View
3-24
3. Check and Preparation