Others (Etc); Reading Setting Data (Restr) - Omron EQUO Series User Manual

(6)

Others (ETC)

Specifies if the unit displays the items for setting file read/write, time setting, IP address,
rate/CO conversion value setting and conversion unit setting.
2
Setting range:
OFF / DISP
Initial value: OFF
Setting Value
OFF
DISP
Note
The ETC setting returns to "OFF" when the unit is reset.
(7)

Reading Setting Data (RESTR)

Restores the unit settings by using the SD memory card with the setting data saved as a
backup using the BCKUP setting (described later).
Operation:
Insert the SD card containing the setting data, and hold the SET/REC/STOP key.
Reading is completed when "DONE" is displayed.
The unit resets itself and restarts when the MODE key is pressed to change the
operation mode.
Note
・Only one setting data item (the setting data for only one unit) can be stored in a single SD
card as a backup. The setting data backed up in one Power Sensor Station can be
restored on other Power Sensor Station unit.
・Setting data reading is not possible when ETC is set to "OFF".
The unit does not display the items for setting file read/write, time
setting, IP address, rate/CO
conversion unit setting.
The CYCLE item returns when the ▽ key is pressed after the
setting is applied with the SET/REC/STOP key.
The unit displays the items for setting file read/write, time setting, IP
address, rate/CO conversion value setting and conversion unit
2
setting.
The RESTR item is displayed when the ▽ key is pressed after the
setting is applied with the SET/REC/STOP key.
4-9
4. Setting the Unit (Unit Operation)
Operation
conversion value setting and
2