5.
Measurement and Recording (Unit Operation)
5.1
Overview
Measured values can be acquired in two ways: recording them in Power Sensor Station unit
or acquiring them to the PC via network. This chapter explains recording in Power Sensor
Station unit.
5.2
Selecting Operation Mode
RUN mode must be entered for power measurement.
Press the MODE key to change the operation mode to "RUN". "RUN" at the bottom right of
the display turns ON.
RUN Mode
RUN Mode
Operation
Note
Changing to other mode is prohibited during recording.
MODE Key
Twice
△/▽ Key
5. Measurement and Recording (Unit Operation)
FUN Mode
MODE Key
△/▽ Key
FUN Mode
Operation
5-1
MODE Key
THR Mode
△/▽ Key
THR Mode
Operation