Preparing Power Supply; Connecting To Power Supply - Omron EQUO Series User Manual

3.3.3 Preparing Power Supply

AC or DC power supply is required to operate this product.
(1)

Connecting to Power Supply

AC Power Supply
Important
・Use the provided AC adapter when using AC power supply.
・Use the provided DC cable when using DC power supply.
・Batteries cannot be used. Do not open the unit cover to attempt to install the batteries.
Note
・The unit does not have a power switch. The unit starts operation immediately when the
power is supplied.
(1) Insert the plug of the AC adapter or DC cable plug into the
Power Supply terminal.
(2) Connect the AC plug of the AC adapter to an outlet (100
VAC to 240 VAC) when using AC power supply. To use DC
power supply, connect the white-lined wire of the DC cable
to the power input (24 VDC) and the non-lined wire to 0V.
3-5
3. Check and Preparation
DC Power Supply