Omron EQUO Series User Manual page 7

Power sensor station

Hide thumbs Also See for EQUO Series:

Table of Contents

Observe the following precautions to ensure safe operation:

・ Do not install the product in the places subject to exposure to water, oil, or chemical splashes.

・ When using an AC adapter, use only the provided AC adapter.

・ If a voltage that exceeds the rated voltage is applied to the AC adapter, smoke may occur. Do not

connect a power supply that exceeds the rated voltage. In a situation where a voltage higher than the

rating is applied, use protective equipment so that the power supply voltage does not exceed the rated

voltage.

・ Do not use the product in a safety circuit for nuclear or life-support systems.

・ Dispose of the product as industrial waste.

・ Do not apply strong shock to the product, or it may cause damage or malfunction. It is recommended to

screw the product to mount it on the wall. Stop using the product when strong shock is applied.

・ When inserting or removing an SD memory card, securely hold the product to prevent damage from

dropping. Do the same when inserting or detaching an AC adapter, alarm output cable, or sensor

connector.

・ Do not expose the product close to magnetic products (e.g. magnetic cards), or sensitive electronics

equipment (e.g. computers or clocks), when using the mounting magnets.

・ Small pieces may be chipped off when using the mounting magnets. In case the pieces get into your

eyes, consult a medical doctor immediately.

・ When using the mounting magnets to install the product, take caution not to allow a finger to be caught

between the product(s) and the magnetic surface.

・ Do not install the product at a high place when using the mounting magnets.

・ Apply an appropriate load to the alarm output terminals to prevent smoke.

・ If liquid crystal leaks because of the damage of the LCD panel, be careful not to touch, inhale or swallow

it. In case liquid crystal gets into your mouth or comes in contact with your skin, consult a medical doctor.

・ Take measures for anti-static electricity (e.g. touching grounded metal object) when handling the product.

Precautions for Safe Use

Table of Contents

Zn-kmx21