The Rear Ports Of Bipac 8501 - Billion BiPAC 8500/8520 User Manual

The Rear Ports of BiPAC 8501

Port
1 Power Switch
2 PWR
3 RESET
LAN
4
1X — 4X
(RJ-45 connector)
5 CONSOLE
6 LINE
Chapter 2: Installing the router
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router
5
6
Power ON/OFF switch
Connect the supplied power adapter to this jack.
To be sure the device is being turned on->press RESET button for:
1-3 seconds: quick reset the device.
6 seconds above, and power off, power on the device: restore to
factory default settings. (Cannot login to the router or forgot your
Username/Password. Press the button for more than 6 seconds).
Caution: After pressing the RESET button for more than 6 seconds, to
be sure you power cycle the device again.
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four
LAN ports when connecting to a PC or an office/home network of
10Mbps or 100Mbps.
Connect a PS2/RS-232 cable to this port when connecting to a PC's
RS-232 port (9-pin serial port).
Connect the supplied RJ-11 ("telephone") cable to this port when
connecting to SHDSL line.
3
2
4
Meaning
1
10