The Rear Ports Of Bipac 8500 / 8520 - Billion BiPAC 8500/8520 User Manual

Shdsl vpn firewall bridge/ router, shdsl.bis (vpn) firewall bridge/router
Table of Contents

Advertisement

The Rear Ports of BiPAC 8500 / 8520

6
Port
1
Power Switch
2
PWR
3
RESET
LAN
4
1X — 4X
(RJ-45 connector)
5
CONSOLE
LINE
6
1X — 2X
(RJ-11 connector)
.
Chapter 2: Installing the router
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router
5
Power ON/OFF switch
Connect the supplied power adapter to this jack.
To be sure the device is being turned on
for:
1-3 seconds: quick reset the device.
6 seconds above, and power off, power on the device:
restore to factory default settings. (Cannot login to the router or
forgot your Username/Password. Press the button for more than
6 seconds).
Caution: After pressing the RESET button for more than 6
seconds, to be sure you power cycle the device again.
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
Connect a PS2/RS-232 cable to this port when connecting to a
PC's RS-232 port (9-pin serial port).
Connect the supplied RJ-11 ("telephone") cable to this port when
connecting to the SHDSL line.
Only BiPAC 8520 has two Line jack ports. BiPAC 8500 has one.
4
Meaning
1
3
2
press RESET button
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save PDF