Wan (Wide Area Network) - Billion BiPAC 8500/8520 User Manual

Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router

WAN (Wide Area Network)

WAN refers to your Wide Area Network connection, i.e. your router's connection to your ISP and
the Internet. There are three items within the WAN section: ISP, DNS and SHDSL.
ISP
The factory default is PPPoE. If your ISP uses this access protocol, click Edit to input other
parameters as below. If your ISP does not use PPPoE, you can change the default WAN
connection entry by clicking Change.
Some ISP may provide more service via different WAN connection. In this case, you can create
more connections by clicking Create to enter the configuration page to setup the type of sevice
from the list then press Next to continue with the configuration. There are 5 types of ISP service
to choose from: RFC 1483 Routed, PPPoA Routed, PPPoE Routed, RFC 1483 Bridged and
IPoA Routed. The device can support maximum of up to 8 WAN connections.
Note: The application of multiple WAN connections depends on your Internet Service Provider.
A simpler alternative is to select Quick Start from the main menu on the left wondow pane.
Please see the Quick Start section of the manual for more information.
46
Chapter 4: Configuration