Factory Default Settings; Web Interface (Username And Password); Device Lan Ip Settings; Isp Setting In Wan Site - Billion BiPAC 8500/8520 User Manual

Factory Default Settings

Before configuring your router, you need to know the following default settings.

Web Interface (Username and Password):

Username: admin
Password: admin
The default username and password are "admin" and "admin" respectively.
If you ever forget the username/password to login to the router, you may
press the RESET button up to 6 seconds to restore the factory default
settings.
Caution: After pressing the RESET button for more than 6 seconds, to be
Attention
Attention
sure you power cycle the device again.

Device LAN IP Settings:

IP Address: 192.168.1.254
Subnet Mask: 255.255.255.0

ISP setting in WAN site:

PPPoE

DHCP server:

DHCP server is enabled.
Start IP Address: 192.168.1.100
IP pool counts: 100

LAN and WAN Port Addresses

The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown
below.
IP address
Subnet Mask
DHCP server function
IP addresses for
distribution to PCs
Chapter 3: Basic Installation
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router
LAN Port
192.168.1.254
255.255.255.0
Enabled
100 IP addresses ranging from
192.168.1.100 to 192.168.1.199
WAN Port
The PPPoE function is
enabled to automatically get
the WAN port configuration
from the ISP.
23