Billion BiPAC 8500/8520 User Manual page 162

SNMP V3:
Specify a name and password for authentication. And define the access right from an identified
IP address. Once the authentication has succeeded, user from this IP address will be able to
view and modify the data.
SNMP Version: SNMPv2c and SNMPv3
SNMPv2c is the combination of the enhanced protocol features of SNMPv2 without the
SNMPv2 security. The "c" comes from the fact that SNMPv2c uses the SNMPv1 community
string paradigm for "security", but is widely accepted as the SNMPv2 standard.
SNMPv3 is a strong authentication mechanism, authorizing with fine granularity for remote
monitoring.
Traps supported: Cold Start, Authentication Failure.
The following MIBs are supported:
From RFC 1213 (MIB-II):
From RFC1650 (EtherLike-MIB):
From RFC 1493 (Bridge MIB):
Chapter 4: Configuration
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router
System group
Interfaces group
Address Translation group
IP group
ICMP group
TCP group
UDP group
EGP (not applicable)
Transmission
SNMP group
dot3Stats
dot1dBase group
158