The Rear Ports - Billion BiPAC 7404V Series User Manual

The Rear Ports

7
8
The Ethernet Port # 4 can be used as a console port. You need a special
console tool which already includes in the package to connect with LAN
port 4 and PC's RS-232 port (9-pin serial port).
Port
Power Switch
1
PWR
2
3 RESET
LAN
4 1X — 4X
(RJ-45 connector)
Console Port (as LAN port 4)
4
(RJ-45 connector)
Phone
1X — 2X
5
(RJ-11 connector)
LINE
6
(Router with LINE port only)
Chapter 2: Installing the router
6 5
Meaning
Power ON/OFF switch
Connect the supplied power adapter to this jack.
To be sure the device is being turned on
button for:
1-3 seconds: quick reset the device.
6 seconds above, and power off, power on the device:
restore to factory default settings. (Cannot login to the router
or forgot your Username/Password.
more than 6 seconds).
Caution: After pressing the RESET button for more than 6 seconds,
to be sure you power cycle the device again.
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
LAN ports when connecting to a PC or an office/home network
of 10Mbps or 100Mbps.
Caution: Port 4 can be either a LAN or Console port at a time but not
both.
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
LAN ports when connecting to a PC or an office/home network
of 10Mbps or 100Mbps.
Caution: Port 4 can be either a LAN or Console port at a time but not
both.
Connect RJ-11 cable to this port when connecting to an analog
phone set.
Connect RJ-11 cable to this port when connecting to the
telephone wall jack.
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router
4
3 1
2
press RESET
Press the button for
9