Adsl - Billion BiPAC 7404V Series User Manual

VoIP/(802.11g) ADSL2+ (VPN) Firewall Router

ADSL

Connect Mode: This mode will automatically detect your ADSL line code, ADSL2+, ADSL2, G.dmt,
G.lite, T1.413, AnnexM2 and AnnexM2+. But in some area, multimode cannot detect the ADSL line code
well. If it is the case, please adjust the ADSL line code to G.dmt or T1.413 first. If it still fails, please try the
other values such as ALCTL, ADI, etc. If you still having trouble with the line, please check with your ISP
for line connect information.
Note: If you have subscribed ADSL1 T1.413 mode line, you may go to the Advanced Options for more connection
module combinations.
Activate Line: Aborting (false) your ADSL line and making it active (true) again for taking effect with
setting of Connect Mode.
Coding Gain: It reduces router's transmit power which will effect to router's downstream performance.
Higher the gain will increase the downstream rate but it sometimes causes unstable ADSL line. The
configurable ADSL coding gain is from 0 dB to 7dB, or automatic.
Tx Attenuation: It is the ADSL transmission power that the modem is using. The lower the power the
better performance in router's upstream. Configurable value is between 0~12.
DSP Firmware Version: Current ADSL line code firmware version.
Connected: Display current ADSL line sync status.
Operational Mode: Display current ADSL mode standard (Operational Mode) your Router is using when
ADSL line has sync.
Annex Type: ADSL Annex A, which works over a standard telephone line. Annex B, which works over an
ISDN line.
Upstream: Display current upstream rate of your ADSL line.
Downstream: Display current downstream rate of your ADSL line.
52
Chapter 4: Configuration