Cabling - Billion BiPAC 7404V Series User Manual

ADSL
7
Antenna
8
(Wireless Router only)

Cabling

One of the most common causes of problems is bad cabling or ADSL line(s). Make sure that all
connected devices are turned on. On the front of the product is a bank of LEDs. Verify that the LAN Link
and ADSL line LEDs are lit. If they are not, verify that you are using the proper cables.
Ensure that all other devices connected to the same telephone line as your router (e.g. telephones, fax
machines, analogue modems) have a line filter connected between them and the wall socket (unless you
are using a Central Splitter or Central Filter installed by a qualified and licensed electrician), and ensure
that all line filters are correctly installed and the right way around. Missing line filters or line filters installed
the wrong way around can cause problems with your ADSL connection, including causing frequent
disconnections.
Chapter 2: Installing the router
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router
Connect the supplied RJ-11 ("telephone") cable to this port
when connecting to the ADSL/telephone network.
Connect the detachable antenna to this port.
10