Billion BiPAC 7404V Series User Manual page 150

Spaces next to VPI and VCI, type 0 and 33 in respectively. Select appropriate ATM Class, Encapsulation
Method, Acceptable Frame Type, Filter Type and PVID for Untagged Frames.
VPI and VCI: Enter the information provided by your ISP.
ATM Class: The Quality of Service for ATM layer.
Encapsulation method: Select the encapsulation format, this is provided by your ISP.
Acceptable Frame Type: Specify what kind of traffic can through this connection, all traffic or only VLAN
tagged.
Filter Type: Specify the type of ethernet filtering performed by the named bridge interface.
All
Ip
Pppoe
PVID for Untagged Frames: PVID is known as Port VLAN Identifier. When an untagged packet is
received by input port(s), this packet will be tagged with specified PVID.
From the example, VPI and VCI only section need to be filled-in and just leave the rest as is. Repeat the
same procedure by clicking Create
Chapter 4: Configuration
Allows all types of ethernet packets through the port.
Allows only IP/ARP types of ethernet packets through the port.
Allows only PPPoE types of ethernet packets through the port.
select RFC1483 Bridged
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router
fill-in the rest of PVC 0/34 to 0/39.
149