Advanced; Static Route - Billion BiPAC 7404V Series User Manual

VoIP/(802.11g) ADSL2+ (VPN) Firewall Router

Advanced

Configuration options within the Advanced section are for users who wish to take advantage of the more
advanced features of the router. Users who do not understand the features should not attempt to
reconfigure their router, unless advised to do so by support staff.
Here are the items within the Advanced section: Static Route, Dynamic DNS, Check Email, Device
Management, IGMP and VLAN Bridge.

Static Route

Click on Routing Table and then choose Create Route add a routing table.
Destination: This is the destination subnet IP address.
Netmask: Subnet mask of the destination IP addresses based on above destination subnet IP.
Gateway: This is the gateway IP address to which packets are to be forwarded.
Interface: Select the interface through which packets are to be forwarded.
Cost: This is the same meaning as Hop. This should usually be left at 1.
141
Chapter 4: Configuration