Information From Your Isp - Billion BiPAC 7404V Series User Manual

Information from your ISP

Before configuring this device, you have to check with your ISP (Internet Service Provider) to find out
what kind of service is provided such as DHCP (Obtain an IP Address Automatically, Static IP (Fixed IP
Address) and PPPoE.
Gather the information as illustrated in the following table and keep it for reference.
PPPoE
PPPoE / PPPoE
with Pass-through
PPPoA
RFC 1483 Bridged
RFC 1483 Routed
IPoA Routed
(IP over ATM)
Chapter 3: Basic Installation
VPI/VCI, VC / LLC-based multiplexing, Username, Password, Service Name,
and Domain Name System (DNS) IP address (it ca be automatically assigned
by your ISP when you connect or be set manually).
VPI/VCI, VC / LLC-based multiplexing, Username, Password, Service Name,
and Domain Name System (DNS) IP address (it ca be automatically assigned
by your ISP when you connect or be set manually). In addition, additional
WAN address can be assigned using PPPoE dialer.
VPI/VCI, VC / LLC-based multiplexing, Username, Password and Domain
Name System (DNS) IP address (it ca be automatically assigned by your ISP
when you connect or be set manually).
VPI/VCI, VC / LLC-based multiplexing to use Bridged Mode.
VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet mask, Gateway
address, and Domain Name System (DNS) IP address (it is a fixed IP
address).
VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet mask, Gateway
address, and Domain Name System (DNS) IP address (it is a fixed IP
address).
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router
18