Configuration; Lan - Local Area Network; Bridge Interface - Billion BiPAC 7404V Series User Manual

Configuration

When you click this item, you get following sub-items to configure the ADSL router.
- LAN, Wan, System, Firewall, VPN, VoIP, QoS, Virtual Server, Time Schedule and Advanced
These functions are described below in the following sections.

LAN - Local Area Network

Here are the items within the LAN section:
Wireless, Wireless Security, Wireless Client Filter, Port Settings

Bridge Interface

You can setup member ports for each VLAN group under Bridge Interface section. From the example, two
VLAN groups need to be created.
Ethernet: P1 (Port 1)
Ethernet1: P2, P3 and P4 (Port 2, 3, 4). Uncheck P2, P3, P4 from Ethernet VLAN port first.
Note: You should setup each VLAN group with caution. Each Bridge Interface is arranged in this order.
Bridge Interface
Ethernet
Ethernet1
Ethernet2
Ethernet3
Management Interface: To specify which VLAN group has possibility to do device management, like
doing web management.
Note: NAT/NAPT can be applied to management interface only.
Chapter 4: Configuration
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router
Bridge Interface, Ethernet, IP Alias, Ethernet Client Filter,
VLAN Port (Always starts with)
P1 / P2 / P3 / P4
P2 / P3 / P4
P3 / P4
P4
and DHCP Server.
30