Block Library Telecontrol St7; Creating A Library - Siemens TIM 1531 IRC Operating Instructions Manual

Block library TeleControl ST7

5.1

Creating a library

Delivery form of the block library
The program blocks of the TD7onCPU library are used as a global library for STEP 7.
The library is archived and compressed on the Internet at the following address:
Link: (https://support.industry.siemens.com/cs/ww/en/view/109755374)
The file archive name has the following form: TD7_<version>.zip
Creating the library
To use the library in STEP 7, follow these steps:
1. Create a suitable directory in the STEP 7 installation directory of your engineering station,
for example, one named "Telecontrol ST7".
2. Save the compressed and archived library (*.zip) in this directory.
3. Unpack the file archive using the utilities of the operating system.
The library is now available as an archived global library under the name "Telecontrol
ST7.zal15".
4. Open the STEP 7 project.
5. In the "Options" menu, select the command "Global libraries > Retrieve library".
The "Retrieve archived global library" dialog opens.
6. Select the archive file.
7. Recommendation: Select the check box "Open the project read-only" to load the global
library read-only.
8. Click Open.
The "Find folder" dialog opens. Select the destination directory in which the archived
global library is to be unpacked.
9. Click "OK".
The library is unpacked and opened.
You can find the library in the STEP 7 project in the library view (task card) in the "Global
libraries" pane under the name "Telecontrol ST7_<Version>".
TIM 1531 IRC
Operating Instructions, 02/2018, C79000-G8976-C468-02
5
129