Hardware Overview; Quick Start Guide; The Front Leds; The Rear Ports - Billion BiPAC 7300(G) RA Quick Start Manual

Quick Start Guide

Hardware Overview

BiPAC 7300G RA

The Front LEDs

Lit when power is ON.
Lit when the
system is ready.

The Rear Ports

Connect the fixed
antenna.
Connect the supplied
RJ-11 cable to this port
when connecting to the
ADSL/telephone
network.
Lit when connected to an
Ethernet device. Green for
100Mbps; Orange for 10Mbps.
Blinking when date is
Transmitted/Received.
Lit Green when the
wireless connection
is established.
Flashes when
sending/receiving
date.
Connect a UTP Ethernet
cable cable(RJ-45)to one of
the four LAN ports when
connectiong to a PC or an
office/home network of
10Mbps or 100Mbps.
Press reset button for 5
seconds to reset the
device or restore to
factory default settings.
2-
-
Lit when successfully
connected to an ADSL
DSLAM connection.
Lit steady when there
is a PPPoA / PPPoE
connection.
Connect the supplied
power adapter to this
jack.
Power
ON/OFF
switch.